Coats

A 3-in-1 jacket is then the most practical choice: a waterproof outer jacket with a zip-out inner lining, so you wear just the outer layer in summer and both together in winter. If you mainly work in the cold, look at a lined winter jacket; if you mainly work in the rain, a breathable rain jacket to EN 343 matters more.

Only if that's explicitly stated. Many work jackets are water-repellent: they hold off a short shower but let water through during prolonged rain. Truly waterproof jackets are tested to EN 343 and have taped seams; you'll find those in the rainwear category.

Yes. Embroidery is more durable on thick fabrics, transfer printing is more cost-effective for larger quantities. On jackets with a waterproof membrane or reflective tape, placement needs to be chosen carefully, since needles or heat can damage the layer. Get in touch and we'll look at what's possible per model.

A 3-layer softshell has an extra membrane between the outer fabric and the inside, so it blocks wind and water better while still breathing. A 2-layer softshell consists of an outer fabric with a bonded fleece interior; it is lighter and more flexible, but offers less protection against rain. For outdoor work in changeable weather, 3-layer is the safer choice; for indoor work or dry weather, 2-layer is often sufficient.

Wash a jacket with a membrane according to the care label, usually at a low temperature and with the zips closed. Do not use fabric softener, as it clogs the pores of the membrane and reduces breathability. A water-repellent finish can be restored over time with a special proofing agent. Hang the jacket to dry after washing instead of putting it in the tumble dryer, unless the label allows it.